NOTE: You will require firmware version 6.0.1-4.1 or above in order to continue
Log in to your Allied Telesis AP web interface.
Step 1 - Captive Portal
On the left menu, click Settings > VAP / Security. Then, click VAP0 or whichever VAP you wish to use and configure with:
On the Virtual Access Point tab:
Status
Enabled
Mode
Access Point
SSID
Guest WiFi (or whatever you wish)
Hidden SSID
Disabled
MAC Filtering
Disabled
Captive Portal
External Page Redirect
External Page URL
*insert access_url here*
Redirect Type
Fixed URL
Fixed URL
*insert redirect_url here*
Primary RADIUS Server IP
*insert radius_server_ip here*
Primary RADIUS Server Key
*insert radius_secret here*
RADIUS Port
1812
Secondary RADIUS Server IP
*insert radius_server2_ip here*
Secondary RADIUS Server Key
*insert radius_secret here*
RADIUS Port
1812
RADIUS Accounting
Enabled
RADIUS Accounting Port
1813
Walled Garden
Add the following entries one by one:
*insert access_domain here*
venuewifi.com
openweathermap.org
cloudfront.net
stripe.com
Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.
Facebook:
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
Twitter:
twitter.com
twimg.com
LinkedIn:
linkedin.com
licdn.net
licdn.com
Instagram:
instagram.com
On the Security tab:
Mode
None
Click Save & Apply to confirm.
Note: Please be share to configure ALL radio's on the Access Point with the same settings as above, for example Radio 1, Radio 2 and Radio 3 depending on your model.
The configuration is now complete.