Open a web browser and log in to your Cisco Catalyst web interface. At the top right, click the Settings icons and enable the Expert mode.
Click on Configuration > Security > Web Auth on the left. Click in to the global profile and configure with:
Click Apply to save. Next, click the Add button. Configure with:
Click Apply to Device to save. Next, click in to the profile you just created and configure with:
On the General tab:
On the Advanced tab:
Click Apply to save. Next, click on Configuration > Security > AAA on the left. Select the Servers / Groups tab click Add. Configure with:
Click Apply to Device to save. Next, click Add again and configure with:
Click Apply to Device to save. On the Server Groups sub tab, click Add. Configure with:
Click Apply to Device to save. Next, click on the AAA Method List tab. Click Add and configure with:
Click Apply to Device to save. Next, click the Accounting sub nav menu on the left and click Add. Configure with:
Click Apply to Device to save. Next, click the AAA Advanced tab and then the Show Advanced Settings >>> option. Configure both Accounting and Authentication with:
Click Apply to Device to save. Next, click Configuration > Tags & Policies > WLANs on the left. Click Add or edit an existing WLAN and configure with:
On the General tab:
On the Security > Layer 2 tab:
On the Security > Layer 3 tab, click Show Advanced Settings >>> and configure with:
Click Apply to Device to save. Next, click Configuration > Security > URL Filters. Click Add and configure with:
*insert access_domain here*
venuewifi.com
openweathermap.org
cloudfront.net
stripe.com
Facebook:
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net
Twitter:
twitter.com
twimg.com
LinkedIn:
linkedin.com
licdn.net
licdn.com
Instagram:
instagram.com
Click Apply to save. Next, click Configuration > Tags & Profiles > Policy on the left. Click Add, leaving all settings at default apart from the following:
On the General tab:
On the Access Policies tab:
On the Advanced tab:
Click Apply to Device to save. Next, click Configuration > Tags & Profiles > Tags on the left. Click Addand configure with:
Click Apply to Device to save. Finally, click Administration > Management > HTTP/HTTPS/Netconf on the left. Configure with:
Be sure to click on Save Configuration at the top right of the page to ensure your changes are persisted on reboot.
The configuration is now complete.