The KB and FAQ content on this support site has now been migrated. Click here to visit our new site today!

IgniteNet Spark/SunSpot/SkyFire

Please log in to the AP web interface and then on the left click on Network > Hotspot Settings.

Configure as per below:

  • Enable Hotspot Service: Enabled

  • Network IP:
  • Network mask:
  • DHCP Start: 10
  • DHCP End: 254
  • DHCP Lease Time: 1800
  • DNS 1:
  • DNS 2:
  • RADIUS Server 1: *insert radius_server here*
  • RADIUS Server 2: *insert radius_server2 here*
  • RADIUS Shared Secret: *insert radius_secret here*
  • RADIUS Auth Port: 1812
  • RADIUS Acct Port: 1813
  • RADIUS Auth Method: PAP
  • Captive Portal URL: *insert access_url here*
  • Captive Portal Secret: *insert uam_secret here*


*insert access_domain here*

If you wish to support social network logins, you also need to add the domains below for each network you plan to support, to the end of the 'Walled Garden' list above, ensuring a comma is separating each entry.


Click on Save.

Next, click on Wireless on the left and for each Radio in your AP (i.e. Radio #0 5GHz) you need to create an SSID. Under Wireless Networks choose the Add SSID tab. Configure as per below:

  • Status: On
  • SSID: Guest WiFi (or whatever you wish)
  • Broadcast: Ticked
  • Client Isolation: On     
  • Method: No Security
  • Network Behavior: Hotspot Controlled
Click on Save.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.