D-Link Nuclias Cloud

Log in to your Nuclias Cloud portal.


Step 1 - RADIUS

At the top, click Configure > Access point > RADIUS servers. Then, click Add a RADIUS server and configure with:

RADIUS server name
guest1_auth
Host
*insert radius_server_ip here*
Port
1812
Secret
*insert radius_secret here*
Access level
Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

RADIUS server name
guest1_acct
Host
*insert radius_server_ip here*
Port
1813
Secret
*insert radius_secret here*
Access level
Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

RADIUS server name
guest2_auth
Host
*insert radius_server2_ip here*
Port
1812
Secret
*insert radius_secret here*
Access level
Organization

Click Save to add the RADIUS server. Next, click Add as RADIUS server again and configure with:

RADIUS server name
guest2_acct
Host
*insert radius_server2_ip here*
Port
1813
Secret
*insert radius_secret here*
Access level
Organization

Click Save to add the RADIUS server.

Step 2 - Walled garden

At the top, click Configure > Access point > Walled garden. Then, click Add a walled garden and configure with:

Walled garden name
guest
Range

Add the following entries one by one:


*insert access_domain here*

venuewifi.com

openweathermap.org

cloudfront.net

stripe.com


Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.


Facebook:

facebook.com

fbcdn.net

akamaihd.net

connect.facebook.net


Twitter:

twitter.com

twimg.com


LinkedIn:

linkedin.com

licdn.net

licdn.com


Instagram:

instagram.com

Press Save to confirm.

Step 3 - SSID

At the top, click Configure > Access point > Profiles and then SSID beside the AP profile you are using. Then, click Add SSID and configure with:

SSID name
Guest WiFi (or whatever you wish)
Band selection
2.4GHz and 5GHz

Press Save to confirm. Next, on the SSID you just created and configure with:

Security
Open
Broadcast SSID
Enable
Guest Access mode
Enable
NAT mode
Enable
Station isolation
Enable

Press Save to confirm. Next, click on the Captive Portal tab and configure with:

Captive portal
Sign-on with External Captive Portal
Option
Custom External Captive Portal
Splash page URL
*insert access_url here*
Primary RADIUS server
*insert radius_server_ip here*:1812
Secondary RADIUS server
*insert radius_server2_ip here*:1812
Primary accounting server
*insert radius_server_ip here*:1813
Secondary accounting server
*insert radius_server2_ip here*:1813
Session timeout
240 minutes
Idle timeout
60 minutes
Walled garden
guest

Click Save to confirm. Finally, click PUSH CONFIGURATION at the top to deploy the configuration to your AP(s).


The configuration is now complete.


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.