Meraki Go APs do not support RADIUS authentication and accounting. Therefore, some reports in the portal like users online now and network reports will be unavailable. Tiered Bandwidth is also unavailable.
Open the Meraki Go app on your phone
Step 1 - Wireless Settings
Press the Settings icon at the bottom and then press WiFi network. Edit an existing network you wish to use or Add a new network. Configure with:
Network Name
Guest WiFi (or whatever you wish)
Password
Leave blank (no password)
Guest network
Enabled
Press Save to confirm.
Step 2 - Guest Portal
On the SSID settings page press the Landing page option. Press Externally hosted and configure with:
Website
*insert access_url here*
Timeout Frequency
Every four hours
Walled Garden
Add the following entries:
*.*insert access_domain here*
*.venuewifi.com
*.openweathermap.org
*.cloudfront.net
*.stripe.com
Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.
Facebook:
*.facebook.com
*.fbcdn.net
*.akamaihd.net
connect.facebook.net
Twitter:
*.twitter.com
*.twimg.com
LinkedIn:
*.linkedin.com
*.licdn.net
*.licdn.com
Instagram:
*.instagram.com
Redirect to Website
*insert redirect_url here*
Press Save to confirm and then return to the WiFi network settings. Configure with:
Active
Enabled
Guest Network
Enabled
Discoverable
Enabled
The configuration is now complete.