TP-Link Omada Controller

You will require Omada Controller v3.1.13 or above to continue.

Open a web browser and log in to your Omada controller

Step 1 - Wireless Settings

Click Wireless Settings from the bottom menu then click Add. Configure with:

SSID
Guest WiFi (or whatever you wish)
Band
2.4GHz and 5GHz
Guest Network
Enabled
Security Mode
None

Click Apply to save.

Step 2 - Guest Portal

On the Wireless Control tab select the Portal header. Click Add a New Portal and configure with:

Portal Name
guestwifi
SSID
select the SSID you just created
Authentication Type
External RADIUS Server
Authentication Timeout
8 Hour
RADIUS Server IP
*insert radius_server_ip here*
RADIUS Port
1812
RADIUS Password
*insert radius_secret here*
Authentication Mode
PAP
NAS ID
guestwifi
RADIUS Accounting
Enable
Accounting Server IP
*insert radius_server_ip here*
Accounting Server Port
1813
Accounting Server Password
*insert radius_secret here*
Interim Update
Enable
Interim Update
120
Portal Customization
External Web Portal
External Web Portal URL
*insert access_url here*
HTTPS Redirect
Disable
Redirect
Enable
Redirect URL
*insert redirect_url here*

Click Apply to save.

Step 3 - Walled Garden

Next, on the Free Authentication Policy header, click Add and configure with:

Policy Name
*insert access_domain here*
Port
1812
Match Mode
URL
URL
*insert access_domain here*
Status
Enable

Click Apply to save. You'll need to perform the same step again for the below URLs:


URLs

venuewifi.com

openweathermap.org

cloudfront.net

stripe.com


Note: If you wish to support social network logins, you also need to add the below entries for each network you plan to support.


Facebook:

facebook.com

fbcdn.net

akamaihd.net

connect.facebook.net


Twitter:

twitter.com

twimg.com


LinkedIn:

linkedin.com

licdn.net

licdn.com


Instagram:

instagram.com


The configuration is now complete.


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.