This guide details how to to enable support for CoA / Disconnect Message on the Ruckus ZoneDirector. This is required in order to use the Tiered Bandwidth data cap and/or E-mail verification kick off feature.
There is no additional configuration required in order to enable CoA for the Ruckus ZoneDirector. It is supported by default. Proceed to Step 2.
IMPORTANT: CoA works by accepting inbound traffic from our RADIUS. We will send this request back to the same WAN IP of which your ZD uses for outbound traffic to our RADIUS. Therefore, you will need to forward port 3799 (UDP) on your firewall from this WAN IP to the internal ZD management IP on your local network.