The KB and FAQ content on this support site has now been migrated. Click here to visit our new site today!

Teltonika RUT Series

NOTE: You will require firmware version R_00.07.00 or above in order to continue

Log in to your Teltonika web interface. At the top, click Network > Wireless. Click Add and configure with:

  • Enable wireless: Yes

Under Device Configuration

  • SSID: Guest WiFi (or whatever you wish)

Under Interface Configuration

  • Encryption: No encryption

Click Save. Next, at the top click Services > Hotspot. Click Edit beside your new SSID. Configure with:

On the General tab:

Under General Settings

  • Configuration profile: Custom
  • Enable: Yes
  • AP IP: Leave default
  • Logout IP: Leave default
  • Authentication mode: External radius
  • Authentication protocol: PAP
  • RADIUS server #1: *insert radius_server here*
  • RADIUS server #2: *insert radius_server2 here*
  • Authentication port: 1812
  • Accounting port: 1813
  • Radius secret key: *insert radius_secret here*
  • UAM port: Leave default
  • UAM UI port: Leave default
  • UAM secret: *insert uam_secret here*
  • NAS Identifier: guest
  • Swap octets: Yes
  • External Landing Page: Yes
  • Landing page address: *insert access_url here*
  • HTTPS redirect: No

Under Walled Garden

Click Add and configure with:

  • Enable: Yes
  • Address: *insert access_domain here*
  • Allow subdomains: Yes

Using the same procedure as above, add a new entry for the below domains:


If you wish to support social network logins, you also need to add the following domains for each network you plan to support







Click Save to apply.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.