Pepwave AP One Series

Please note: You need firmware version 3.5.4 or above to continue.


Log in to your Pepwave AP One web interface.


Click AP at the top and then New SSID. Configure with the following:


Under SSID Settings:

  • Enable: Enabled (ticked)
  • Radio Selection: 2.4GHz and 5GHz
  • SSID: Guest WiFi (or whatever you wish)
  • Broadcast SSID: Enabled (ticked)
Under Security Settings:
  • Security Policy: Open (No Encryption)
Under Captive Portal:
  • Captive Portal: Enable
  • Authentication Method: RADIUS
  • RADIUS Security: PAP
  • Splash Page: *insert access_url here*
  • Landing Page: Enabled (ticked)
  • Landing Page URL: *insert redirect_url here*
  • Profile MAC Address: LAN MAC Address
  • Allowed Domains / IPs: Enter the following domains one per line:

*insert access_domain here*
venuewifi.com
openweathermap.org
cloudfront.net
stripe.com

If you wish to support social network logins, you also need to add the domains below for each network you plan to support

Facebook Twitter LinkedIn Instagram

facebook.com

fbcdn.net

akamaihd.net

connect.facebook.net

twitter.com

twimg.com

linkedin.com

licdn.net

licdn.com

instagram.com


Under RADIUS Server Settings (Primary Server):

  • Host: *insert radius_server_ip here*
  • Secret: *insert radius_secret here*
  • Authentication Port: 1812
  • Accounting Port: 1813

Under RADIUS Server Settings (Secondary Server):

  • Host: *insert radius_server2_ip here*
  • Secret: *insert radius_secret here*
  • Authentication Port: 1812
  • Accounting Port: 1813
Under Guest Protect:
  • Block LAN Access: Enabled (ticked)

Click Save to confirm.


At the top right, click Apply Changes to complete.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.