Aerohive (HiveManager)

Please note: You need to be running HiveManager 6.4r1 or above in order to continue. Earlier versions are not supported.

Log in to your HiveManager web interface

Click on Configuration at the top and then on Guided Configuration on the left.

Under Choose Network Policy click New and configure with:

Name GuestWiFi
Wireless Access Enabled
Switching Disabled
Branch Routing Disabled
Bonjour Gateway Disabled

Click on Create to continue
 
Next to SSIDs click Choose. Click on New and configure with:

Profile Name guestwifi
SSID Guest WiFi (or whatever you wish)
Enabled Captive Web Portal Enabled

All other settings can be left at their defaults.

Click Save and then OK

Next, click on <Captive Web Portal> and choose New. Configure with:

Name guestwifi
Registration Type External Authentication

Under Captive Web Portal Login Page Settings:

Login URL *insert access_url here*
Passwor Encryption No Encryption
Authentication Method PAP

Under Captive Web Portal Success Page Settings:

Show the success page... Disabled
After a successful login Redirect to an external page
Use simple URL address *insert redirect_url here*

Under Optional Advanced Configuration:

Use network default settings Enabled
Use HTTP 302 a the redirection method Enabled
Enable HTTPS No

Under Walled Garden:

IMPORTANT: You will need to add the below entries one by one. Click on New, enter the domain and then click Apply. Repeat this until you have all domains in the list below.

*insert access_domain here*
*stripe.com
*venuewifi.com
*openweathermap.org
*cloudfront.net

If you wish to support social network logins, you also need to add the domains below for each network you plan to support.

Facebook *facebook.com
*fbcdn.net
*akamaihd.net
connect.facebook.net
Twitter *twitter.com
*twimg.com
LinkedIn *linkedin.com
*licdn.net
*licdn.com
Instagram *instagram.com
Weibo *weibo.com
login.sina.com.cn
VKontakte *vk.me
*vk.com
 
Click Save

Next, click on <RADIUS Settings> and choose New. Configure with:

RADIUS Name guest

Under Add a New RADIUS Server configure with:

IP Address/Domain Name *insert radius_server here*
Server Type Auth/Acct
Shared Secret *insert radius_secret here*
Confirm Secret as above
Server Role Primary

Click Apply to add, and then click on New to add another:

IP Address/Domain Name *insert radius_server2 here*
Server Type Auth/Acct
Shared Secret *insert radius_secret here*
Confirm Secret as above
Server Role Backup1

Click Apply again, and then click on Save
 
Under User Profile click on Add/Remove.

Select default-profile and click Save

Further down the page, beside Advanced Settings click Edit 

Click on Service Settings and beside ALG Services click the Plus (+) icon  Configure with:

Name guestwifi
DNS Enabled
HTTP Enabled
 
Click on Save and then Save again at the top right.
 
Finally, click on Continue at the top right.

You are now asked which of your access points you wish to push the new settings to (typically all your access points). Select all that apply, and click Update > Update Devices

Click Update.

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.