Xirrus

IMPORTANT: Your device must be running AOS 7.1 firmware or above to continue.
NOTE: You can also use XMS to configure, but the layout may be different.


Start by logging into your Xirrus AP web interface.

Step 1 - External Radius

Click Security > External RADIUS on the left. Configure with:

RADIUS Attribute Formatting
Ethernet-MAC
Station MAC Format
UC-hyphenated (XX-XX-XX-XX-XX-XX)
Accounting
On
Accounting Interval
120

Click Save changes to flash at the top right.

Step 2 - SSID

Click SSID > SSID Management on the left. Underneath the current SSIDs, enter Guest WiFi (or whatever you wish) and click Create. Configure this new SSID with:

SSID
Enabled
Brdcst
Enabled
Encryption
None/Open (remove the Global checkbox)
WPR
Ticked

Next, scroll down the page and under Web Page Redirection Configuration, configure with:

Landing Page URL
*insert redirect_url here*
Server
External Login
Redirect URL
*insert access_url here*
Redirect Secret
*insert uam_secret here*

Next, under WPR Whitelist Configuration, add the following domains one by one:

*.*insert access_domain here*

*.cloudfront.net

*.venuewifi.com

*.openweathermap.org

*.stripe.com

Note: If you wish to support social network logins, you also need to add the URL entries below for each network you plan to support:

Facebook:

*.facebook.com

*.fbcdn.net

*.akamaihd.net

connect.facebook.net


Twitter:

*.twitter.com

*.twimg.com


LinkedIn:

*.linkedin.com

*.licdn.net

*.licdn.com


Instagram:

*.instagram.com


Next, under Authentication Service Configuration configure with:

Authentication Server
External Radius

Under Primary:

Host / IP Address
*insert radius_server here*
Port
1812
Shared Secret
*insert radius_secret here*
Verify Secret
as above
Accounting
Enabled

Under Secondary:

Host / IP Address
*insert radius_server2 here*
Port
1812
Shared Secret
*insert radius_secret here*
Verify Secret
as above

Under Primary (Accounting):

Host / IP Address
*insert radius_server here*
Port
1813
Shared Secret
*insert radius_secret here*
Verify Secret
as above

Under Secondary (Accounting):

Host / IP Address
*insert radius_server2 here*
Port
1813
Shared Secret
*insert radius_secret here*
Verify Secret
as above
Interval
120

Click Save changes to flash at the top right to commit your changes.


The configuration is now complete.


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.