Netgear WNR612 v2

Please connect an Ethernet cable from your existing modem/router/network in to the blue port on the back of the Netgear

Please connect an Ethernet cable between yellow port 1 on the back of the Netgear and your computer.

Turn on the router and wait for a few minutes.

Open a web browser and type http://192.168.1.1 in to the address bar.

 


You will be prompted to log-in. The default username is "
admin" and the password is "password" unless you have changed these.

Click on "Router Upgrade" on the left menu.

 

 


Click "
Browse" and browse to the firmware file that you have been provided.

Click "Upload" to confirm the firmware upgrade.

 
NOTE: If you have an error stating the file is not recognised, please rename the downloaded firmware file to "wnr612v2-V1.0.0_31.0.5.img" and try again.


 

The upgrade process will now begin. This takes up to 5 minutes to complete.



Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.