Deliberant APC

Configure your PC with a static IP address on the 192.168.2.0 subnet (i.e. 192.168.2.10) with a mask of 255.255.255.0.


Connect the APC Ethernet interface into the same physical network as your PC. 

Wait a few minutes for the AP to boot-up.

Open a web browser and type http://192.168.2.66 in to the address bar

The default username is "admin" and the password is "admin01" (unless you have changed these prior)

 

Click on "Configuration" tab on the top menu and then select "Network" from the sub menu below.

 

On the "Network Mode" drop down menu, select "Router"

Still on the Configuration tab, select "Wireless" from the sub menu and set the SSID to whatever wireless network name (SSID) you wish to broadcast

On the Security section, click the "Security" drop down menu, and choose "UAM"

 

Enter the following settings:
  • Radius Server 1: *insert radius_server here*
  • Radius Server 2: *insert radius_server2 here*
  • Radius Secret: *insert radius_secret here*
  • Radius Auth Port: 1812
  • Radius Acct Port: 1813
  • Radius Web Page Type: External
  • UAM Login Page: *insert access_url here*
  • UAM Secret: *insert uam_secret here*

DHCP Server Settings:

  • Interface IP Address: 10.1.0.1
  • DHCP Server: 10.1.0.1
  • Subnet Mask: 255.255.255.0
  • DNS Server 1: 10.1.0.1

On the White list section add the following (clicking the + to add entries)

*insert access_domain here*

venuewifi.com

openweathermap.org

cloudfront.net
stripe.com


If you wish to support social network logins, you also need to add the domains below for each network you plan to support


FacebookTwitterLinkedInInstagram
facebook.com
fbcdn.net
akamaihd.net
connect.facebook.net

twitter.com

twimg.com

linkedin.com
licdn.net
licdn.com

instagram.com

 

  • Click on Apply & Save, then restart the device.

 

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.