Airtight / Mojo Networks

Open a web browser and log in to your Airtight / Mojo Management dashboard

 

Select "Configuration", click the "Device Configuration" icon and click the "SSID Profiles" icon

 

Choose "Add New SSID Profile"

Set the New SSID Profile with the following details:

 

  • Profile Name: Guest Wi-Fi
  • SSID: Whatever you want to broadcast for your wireless network name (SSID)
  • Broadcast SSID: Ticked

    Under The 
    Security section:
  • Security Mode: Open
  • Client Isolation: Ticked
  • NATTicked
  • Start IP10.1.0.2
  • End IP10.1.0.254
  • Local IP10.1.0.1
  • Subnet255.255.255.0
  • DNS Servers add:
    8.8.8.8
    and 8.8.4.4
  • Lease time1440

 

Under the Captive Portal section:


Apply the following settings:

 

  • Enable Captive Portal: Ticked
  • External Splash Page with RADIUS Authentication: Ticked
  • Splash Page URL *insert access_url here*

    Note: The URL may cause an error here but this can be ignored.

  • Shared Secret: *insert uam_secret here*
  • Walled Garden: Add the below domains one by one (opting for ports 80 and 443)

    *insert access_domain here*

    venuewifi.com

    openweathermap.org

    cloudfront.net
    stripe.com


    If you wish to support social network logins, you also need to add the domains below for each network you plan to support


    FacebookTwitterLinkedInInstagram
    facebook.com
    fbcdn.net
    akamaihd.net
    connect.facebook.net

    twitter.com

    twimg.com

    linkedin.com
    licdn.net
    licdn.com

    instagram.com


  • For Redirect URL: *insert redirect_url here*

 
Under the Radius Settings link:


  • Called Station Id: %m

  • Primary Authentication Server: *insert radius_server_ip here*
  • Port Number: 1812
  • Shared Secret: *insert radius_secret here*

  • Secondary Authentication Server: *insert radius_server2_ip here*
  • Port Number: 1812
  • Shared Secret: *insert radius_secret here*

  • Accounting: Ticked
  • Interval: 10

  • Primary Accounting Server: *insert radius_server_ip here*
  • Port Number: 1813
  • Shared Secret: *insert radius_secret here*

  • Secondary Accounting Server: *insert radius_server2_ip here*
  • Port Number: 1813
  • Shared Secret: *insert radius_secret here*

 

Click Save and then Click Save again

Go back to "Device Configuration":

 

  • From the top and choose "Device Templates"
  • And from here you should configure your new SSID so that it is attached to a device template, and then apply this template to your access point(s).

 

 

 

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.