Buffalo WZR-HP-G450H

Please connect an Ethernet cable from your existing router/network in to the port labelled "Internet" on the back of the Buffalo.


Then connect an Ethernet cable between port 1 on the back of the Buffalo and your computer

 

Buffalo  WHR-HP-G300N with wires

 

Turn on the router and wait for a few minutes

Open a web browser and type http://192.168.10.1 in to the address bar

 

Buffalo WHR-HP-G300N: login

 

You will be prompted to log-in. The default username is "admin" and the password is "admin" (unless you have changed these).

Click on "Administration" on the left menu

 

Buffalo WHR-HP-G300N: Select Administration

 

Click on "Firmware Upgrade" on the left menu

Click "Browse" and select the firmware file that you have been provided

Be sure to set the "After flashing, reset to" option to "Reset to Default Settings"

Click on "Upgrade".

The upgrade process will now begin and take up to 5 minutes to complete, and reboot

 

Buffalo WHR-HP-G300N: upgrading firmware

 

Buffalo WHR-HP-G300N: rebooting firmware


Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.