Linksys WRT160NL

Please connect an Ethernet cable from your existing router/network in to the port labelled "Internet" on the back of the Linksys.

Please connect an Ethernet cable between port 1 on the back of the Linksys and your computer.

     

    Linksys WRT160NL with wires

     

    Turn on the router and wait for a few minutes.

    Open a web browser and type http://192.168.1.1 in to the address bar.

    You will be prompted to log-in. The default username is "admin" and the password is "admin" (unless you have changed these).

       

      Linksys WRT160NL login screen

       

      Click on "Administration" on the top menu

      Click "Firmware Upgrade" on the menu below.

      Click "Browse" and select the firmware file that you have been provided.

         

        Linksys WRT160NL administration (firmware)

          

        Click "Start to Upgrade" and press "OK" to confirm.

         

        Linksys WRT160NL firmwaree upgrading

         

        The upgrade process will now begin and take up to 5 minutes to complete. 

        Did you find it helpful? Yes No

        Send feedback
        Sorry we couldn't be helpful. Help us improve this article with your feedback.